He's behind you!

Encore Posts

Projects which made their first appearances elsewhere for Design Team duties or Guest Designer opportunities, but which only had a sneak peek here, are being gathered together in the pages of my virtual scrapbook.  I'm calling them "Encore" posts and they're formatted differently (all the way down the centre), so you can spot them easily.

Please don't feel that you have to comment all over again!

There are a couple of Calico Craft Parts Halloween projects which have been patiently waiting to put in a full appearance here at Words and Pictures.  Since I've been visiting friends, I thought I'd take the opportunity to pop in a couple of Encore posts for this spookiest of seasons.  So here's the first of them - a haunted shadow box of a shrine that I had so much fun with - and here's what I wrote over at Calico back in September 2015.

____________________

Hello all, I've been enjoying getting spooky - so much so that this is a bonus extra project.  I'm not supposed to be here until Monday - but BOO... surprise!!  And here's what I've been playing with.

There are so many amazing designs in the Halloween sections - and some of them, like some of the bare trees for instance, will work on non-Halloween projects too.  I've been playing with just a few of them, and came up with this haunted house - I'm just not sure who's haunting whom!

I started with the Spooky Shrine Kit, and I knew I wanted to try to get a zombie as well as a couple of skeletons in.  Given their relative sizes, I needed to pretend the zombie was in the background.  And given their relative shapes, I needed him to be part way up the back wall!  So I had to create a bit of a trompe l'oeil... a corridor for him to come walking down.

I plotted the basic position and laid in the doorway and the light spilling out of it.

I wallpapered and laid flooring, adding more light over the top.

I extended the papers onto the side walls and the floor.  I also did some distressing with the DecoArt Media Fluid Acrylics.  Turns out Transparent Yellow Iron Oxide, Quinacridone Gold and Raw Umber are perfect for creating a tobacco-stained look!

Putting in the corridor - hand-drawn dado rail and panelling - I had to cheat the perspective lines a bit, so now it looks as though the corridor arrives at a slight angle.  And I created a door frame with matchsticks painted in Raw Umber.  Once all that was done, I glued it all together.

Once glued, I cut papers to cover the back of the shrine.  I find it best to leave this until after the gluing together, as then you can work right to the edges of the walls, covering up the interlocking edges.

I had lots of fun painting my Craft Parts with more DecoArt Fluid Acrylics.  (You can see how they look "naked" in that first making-of picture above.)  The Zombie Style 2 is done with Green Gold and Viridian and maybe a touch of Paynes Grey, and the fabulous Carved Pumpkin has Red Iron Oxide, Quin Gold, Raw Umber, Transparent Yellow Iron Oxide and Green Gold.  They each got a bit more touching up after this stage.

My somewhat depressed seated skeleton needed something to help him sit further "downstage" in the room.  In the end, the simplest solution was to glue his pelvis to a small wooden reel.  As you can see, he's now self-supporting, so I was able to glue him in his position quite easily.

And here they come... the Zombie in the doorway...

Skeleton Style 1 a little further forward, supported partly by the matchstick doorframe...

And Skeleton Style 3 slumped in the foreground.

I think he's so exhausted with the whole haunting business that he can't even be bothered to warn his pal that "he's behind you"!

You'll see that the spooky old portrait on the wall has changed position - it was just getting lost behind Skeleton 1's head.

Around the back and sides, the Halloween fun goes on.  The Carved Pumpkin sits on the back under the excellent advice to "Scream".  I shaded the papers using Quinacridone Gold, Green Gold, Viridian and Raw Umber so that it would all tie together.

On the sides, there are some bats hanging about - of course! - very simply painted with Paynes Grey.

I'm really happy with the look of the pumpkin - I think he's one of my favourite Jack o'Lanterns I've seen, even before you get the paint on him.  I'd happily use him "naked" on cards or tags too.

I love the sheen you get using the translucent DecoArt paints on the Craft Parts - very cool.

And because the Craft Parts are of such good depth and quality, the bats cast their own spooky shadows.

And finally, the Spooky front panel... same paints in action and then some DecoArt Crackle Glaze, Raw Umber rubbed into the cracks and wiped back, followed by a coat of Ultra-Matte Varnish because for once I didn't want it too shiny.

The Spooky word is done in Raw Umber with Paynes Grey - and the spider and his webs are basically Paynes Grey too.  It looks really cool over the dark wood of the basic Craft Parts.

So I hope I haven't spooked you too much...

No, I hope I have!  Mwaah hah haahhh!

I certainly hope I've inspired you to check out the Halloween offerings at Calico Craft Parts - there's enough inspiration there for even the most avid Halloween fiend.  As I said, I'll be back again on Monday - til then, sleep tight and mind the bugs don't bite!

________________________

Back to the present day, and it's not Monday, in fact, but Tuesday that I'll be back.  Yes, that's All Hallows Eve and I'll be here with a creepy little creation just for the Halloween fans amongst you.  For now, just keep an eye out behind you...

You know what they say, when the going gets scary, the scared gets scarce!
Shaggy from Scooby Doo